Stall Barn
We have designed this barn to be composed of two or three stalls to house livestock or for kennel usage. Many customers will utilize one stall for feed and other supplies. The pressure treated sill plate allows the building to be dragged around a pasture.
Picture this attractive and practical prefabricated horse barn out in your green rolling pasture. With a solid kick plate around the whole interior, this is a sturdy enough building for all your livestock needs. This prefab horse stall shed was designed to be dragged from pasture to pasture when you rotate your fields. Try to avoid placing the barn in a low spot or at the bottom of a hill where water can accumulate. Place the shed so the open side is opposite the direction from prevailing winds, to provide shelter against cold arctic winds. We recommend the building sit on a level compacted crushed stone base 8 – 12 inches deep. Once the building is in place, lay rubber matting on top of the stone and add a bed of wood shavings, straw, or saw dust. Find quality horse stalls and horse barn kits at Jamaica Cottage Shop today! Whether raising chickens and rabbits or cows and horses, protection from the elements is essential for keeping animals healthy and productive. If you raise large livestock animals that are sensitive to rain, wind and hot sun, setting up a sturdy barn is one of the best investments you can make in your animals’ health. Some may require stall barn shelter for nightly quarters as well as day shelter such as a portable prefab loafing shed. If you keep horses or other animals that like to roam, consider a run-in shed. These provide the same reliable protection from wind and rain but allow more freedom. Our run-in-sheds, designed as portable structures, allow for rotation of fields by dragging the building to a new location.
From the smallest chicken coops to the largest stall barns, our buildings are made from rot-resistant Vermont Hemlock and Pine providing sufficiently warm, dry, and well-ventilated conditions to fit your livestock needs. Their simple interiors are easy to clean, helping to protect your animals from disease and parasites. They’re also structurally sound enough to keep out large or crafty predators such as foxes and raccoons.
Offered as a frame only kit, complete pre-cut kit or step-by-step plans nationwide, our outdoor post and beam livestock solutions reflect the quality craftsmanship and traditional aesthetic of colonial New England. If you live in our Northeast delivery area, consider purchasing a fully assembled building delivered to your prepared site. The natural wood tones of Vermont pine and hemlock are attractive by themselves, but the buildings are easily painted to harmonize with your home. Black hinges, latches, and other hardware add a touch of rustic elegance. Browse our livestock kits, plans, and prefab models today to get started.
Select alternate Sizes and Types to View Specifications
10×20 Stall Barn
Complete Pre-Cut Kit (Pre-Set Options)
Base Area: 200 sq. ft.
Recommended Foundation: 8–10” Crushed Gravel
Overall Dimensions: 10’6” H x 11’10” W x 21’2” D
Estimated Weight: 6,500 lbs
SILL PLATES
6×6 Treated Sill Plate
WALLS
4”x4” Hemlock Post and Beam Wall Framing
Wall Height: Front: 90” Rear: 70”
10’ Half Partition with Steel Pipes
Siding: 1” rough sawn Pine Board & Batten
1” rough sawn Pine Corner & Door Trim & 2” rough sawn Pine Fascia & Shadow Trim
ROOF
Saltbox Roof Style
Roof Pitch:
Front: 10/12; Rear: 6/12
2”x6” rough sawn Hemlock Rafters 24” On Center
1”x6” rough sawn Hemlock Exposed Collar Ties
1”x4” rough sawn Hemlock Strapping 20” On Center
Corrugated 29g Metal Roofing, Color: Evergreen
DOORS:
2 (qty) 4-0 JCS-built 2” Thick rough sawn Pine Single Dutch Doors, no ramp; Heavy Duty Strap Hinges
Additional Features
1 (qty) Wood Louvered Vent
Heavy Duty Steel Corner Brackets
4×4 Bottom Plate with 1/2 Lapped Corner Braces
Solid Hemlock 36” Kick Plate around Interior
Estimated Assembly Time & Logistic Information
Estimated Assembly Time: Two People: 30 hrs
Estimated Shipping Cube Sizes
Cube 1: 42”x50”x144”
Cube 2: 42”x48”x96”
Available Versions |
Frame Only Pre-Cut Kit
See SpecificationsComplete Pre-Cut Kit
See SpecificationsFully Assembled
See Specifications10×30 Stall Barn
Complete Pre-Cut Kit (Pre-Set Options)
Base Area: 300 sq. ft.
1 (qty) 10’ x 10’ Run-In Stall 100 sq. ft.
2 (qty) 10’ x 10’ Enclosed Stalls 200 sq. ft.
Recommended Foundation: 8–10” Crushed Gravel
Overall Dimensions: 10’6” H x 11’10” W x 31’2” D
Estimated Weight: 7,400 lbs
SILL PLATES
6×6 Treated Sill Plate
WALLS
4”x4” Hemlock Post and Beam Wall Framing
Wall Height: Front: 90”; Rear: 70”
10’ Half Partition with Steel Pipes between Enclosed Stalls, 10’ Full Partition Between Run-In Stall
Siding: 1” rough sawn Pine Board & Batten
1” rough sawn Pine Corner & Door Trim & 2” rough sawn Pine Fascia & Shadow Trim
ROOF
Saltbox Roof Style
Roof Pitch:
Front: 10/12; Rear: 6/12
2”x6” rough sawn Hemlock Rafters 24” On Center
1”x6” rough sawn Hemlock Exposed Collar Ties
1”x4” rough sawn Hemlock Strapping 20” On Center
Corrugated 29g Metal Roofing, Color: Evergreen
DOORS & ROUGH OPENING:
2 (qty) 4-0 JCS-built 2” Thick rough sawn Pine Single Dutch Doors, no ramp; Heavy Duty Strap Hinges
1 (qty) 64”x80-1/2” Rough Opening
Additional Features
1 (qty) Wood Louvered Vent
Heavy Duty Steel Corner Brackets
4×4 Bottom Plate with 1/2 Lapped Corner Braces
Solid Hemlock 36” Kick Plate around Interior
Estimated Assembly Time & Logistic Information
Estimated Assembly Time: Two People: 40 hrs
Estimated Shipping Cube Sizes
Cube 1: 42”x48”x192”
Cube 2: 42”x48”x120”
Available Versions |
Frame Only Pre-Cut Kit
See SpecificationsComplete Pre-Cut Kit
See SpecificationsFully Assembled
See Specifications12×20 Stall Barn
Complete Pre-Cut Kit (Pre-Set Options)
Base Area: 240 sq. ft.
Total Interior Area: 240 sq. ft.
Recommended Foundation: 8–10” Crushed Gravel
Overall Dimensions: 10’6” H x 13’2” W x 21’2” D
Estimated Weight: 7,800 lbs
SILL PLATES
6×6 Treated Sill Plate
WALLS
4”x4” Hemlock Post and Beam Wall Framing
Wall Height: Front: 93”; Rear: 76”
12’ Half Partition with Steel Pipes
Siding: 1” rough sawn Pine Board & Batten
1” rough sawn Pine Corner & Door Trim & 2” rough sawn Pine Fascia & Shadow Trim
ROOF
Saltbox Roof Style
Roof Pitch:
Front: 12/12; Rear: 4/12
2”x6” rough sawn Hemlock Rafters 24” On Center
1”x6” rough sawn Hemlock Exposed Collar Ties
1”x4” rough sawn Hemlock Strapping 20” On Center
Corrugated 29g Metal Roofing, Color: Evergreen
DOORS:
2 (qty) 4-0 JCS-built 2” Thick rough sawn Pine Single Dutch Doors, no ramp; Heavy Duty Strap Hinges
Additional Features
1 (qty) Wood Louvered Vent
Heavy Duty Steel Corner Brackets
4×4 Bottom Plate with 1/2 Lapped Corner Braces
Solid Hemlock 36” Kick Plate around Interior
Estimated Assembly Time & Logistic Information
Estimate Assembly Time: Two People: 34 hrs
Estimated Shipping Cube Sizes
Cube 1: 42”x42”x144”
Cube 2: 42”x43”x144”
Available Versions |
Frame Only Pre-Cut Kit
See SpecificationsComplete Pre-Cut Kit
See SpecificationsFully Assembled
See Specifications12×30 Stall Barn
Complete Pre-Cut Kit (Pre-Set Options)
Base Area: 360 sq. ft.
(1)10’ x 12’ Open Run-In Stall 100 sq. ft.
(2) 10’ x 12’ Enclosed Stalls 200 sq. ft.
Recommended Foundation: 10–12” Crushed Gravel
Overall Dimensions: 10’6” H x 13’2” W x 31’2” D
Estimated Weight: 8,800 lbs
SILL PLATES
6×6 Treated Sill Plate
WALLS
4”x4” Hemlock Post and Beam Wall Framing
Wall Height: Front: 93”; Rear: 76”
12’ Half Partition with Pipes between Enclosed Stalls, 12’ Full Partition Between Run-In Stall
Siding: 1” rough sawn Pine Board & Batten
1” rough sawn Pine Corner & Door Trim & 2” rough sawn Pine Fascia & Shadow Trim
ROOF
Saltbox Roof Style
Roof Pitch:
Front: 12/12 Rear: 4/12
2”x6” rough sawn Hemlock Rafters 24” On Center
1”x6” rough sawn Hemlock Exposed Collar Ties
1”x4” rough sawn Hemlock Strapping 20” On Center
Corrugated 29g Metal Roofing, Color: Evergreen
DOORS & ROUGH OPENING:
2 (qty) 4-0 JCS-built 2” Thick rough sawn Pine Single Dutch Doors, no ramp; Heavy Duty Strap Hinges
1 (qty) 64”x80-1/2” Rough Opening
Additional Features
1 (qty) Wood Louvered Vent
Heavy Duty Steel Corner Brackets
4×4 Bottom Plate with 1/2 Lapped Corner Braces
Solid Hemlock 36” Kick Plate around Interior
Estimated Assembly Time & Logistic Information
Estimated Assembly Time: Two People: 44 hrs
Estimated Shipping Cube Sizes
Cube 1: 42”x45”x192”
Cube 2: 42”x44”x192”
Available Versions |
Frame Only Pre-Cut Kit
See SpecificationsComplete Pre-Cut Kit
See SpecificationsFully Assembled
See SpecificationsPurchase Standard Configuration
With one Easy Click
Plans, Kits or Fully Assembled
Frame Only PCK | Complete PCK | Fully Assembled | Plans Only | |
---|---|---|---|---|
10X20 | $4,814.00 | $10,684.00 | $15,516.00 | $69.90 |
10X30 | $6,779.00 | $16,027.00 | $23,264.00 | $69.90 |
12X20 | $6,624.00 | $13,985.00 | $19,414.00 | -- |
12X30 | $8,986.00 | $20,978.00 | $29,119.00 | -- |